S-5-Z Mini Seam Clamp

$5.81$6.28

Shorter than the regular S-5-Z, the S-5-Z mini clamp is specially developed to fit profiles having a round bulb seam configuration. Its two-piece design allows it to be easily installed anywhere along the length of the rib.

The Hex bolt is no longer standard with S-5! mini clamps. Options are:

Clear

The S-5-Z mini clamp is specially developed to fit profiles having a round bulb seam configuration. Its two-piece design allows it to be easily installed anywhere along the length of the rib. The S-5-Z Mini is a bit shorter than the regular S-5-Z and has one setscrew rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment just about anything!*

*S-5!® Mini clamps are not compatible with, and should not be used with, S-5! SnoRail /SnoFence or ColorGard® snow retention systems.

If you are using ColorGard, make sure to use the regular S-5-Z seam clamp.

The S-5-Z mini clamp comes complete with one [1] 3/8"x24 x 0.80" round nose set screw.  All hardware is stainless steel. The insert is aluminum.

The Hex bolt is no longer standard with S-5! mini clamps. Options are:

Not what you are looking for? Here are more S-5! mini clamps you might consider.

Not sure what you need? Call us at 770-405-1060 Monday-Friday EST or email us at tech@rapidmaterials.com

S-5-Z Mini Brochure S-5-Z Mini Installation S-5-Z Mini CAD Drawing

Additional information

Weight 5.44 oz
Dimensions 1.8 × 1.93 × 1.90 in
Select Bolt Option

No Bolt, 16mm (5/8") Bolt, 20mm (7/8") Bolt, 40mm (1-9/16") Bolt

Reviews

There are no reviews yet.

Be the first to review “S-5-Z Mini Seam Clamp”

Your email address will not be published. Required fields are marked *

The S-5-Z mini clamp is specially developed to fit profiles having a round bulb seam configuration. Its two-piece design allows it to be easily installed anywhere along the length of the rib. The S-5-Z Mini is a bit shorter than the regular S-5-Z and has one setscrew rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment just about anything!*

*S-5!® Mini clamps are not compatible with, and should not be used with, S-5! SnoRail /SnoFence or ColorGard® snow retention systems.

If you are using ColorGard, make sure to use the regular S-5-Z seam clamp.

The S-5-Z mini clamp comes complete with one [1] 3/8″x24 x 0.80″ round nose set screw and one [1] M8-1.25 x 16mm Hex Flange Bolt. All hardware is stainless steel. The insert is aluminum.