S-5-T Mini Seam Clamp

$5.81$6.28

Shorter than the regular S-5-T, the S-5-T Mini clamp is specially developed to fit profiles having a T shaped seam configuration.

The Hex bolt is no longer standard with S-5! mini clamps. Options are:

Clear
SKU: N/A Categories: , , Tags: , , ,

Shorter than the regular S-5-T, the S-5-T Mini clamp is specially developed to fit profiles having a T shaped seam configuration. It will also work on architectural single-fold, or angle-seam profiles having a horizontal projection of 5/8 or less. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam. The S-5-T Mini is a medium-duty, non-penetrating seam clamp. It is a bit shorter than the S-5-T seam clamp and has one setscrew rather than two. The S-5-T Mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment-just about anything!

*S-5!® Mini clamps are not compatible with, and should not be used with, S-5! SnoRail /SnoFence or ColorGard® snow retention systems.

If you are using the Colorgard snow retention system, make sure you use the S-5-T seam clamp.

The S-5-T Mini clamp comes complete with one [1] 3/8"x 24 x 0.80" round nose set screw. All hardware is stainless steel.

The Hex bolt is no longer standard with S-5! mini clamps. Options are:

S-5-T Mini Brochure S-5-T Mini Installation S-5-T Mini CAD Drawing

Additional information

Weight 4 oz
Dimensions 2 × 1.15 × 1.4 in
Select Bolt Option

No Bolt, 16mm (5/8") Bolt, 20mm (7/8") Bolt, 40mm (1-9/16") Bolt

Reviews

There are no reviews yet.

Be the first to review “S-5-T Mini Seam Clamp”

Your email address will not be published. Required fields are marked *

Shorter than the regular S-5-T, the S-5-T Mini clamp is specially developed to fit profiles having a T shaped seam configuration. It will also work on architectural single-fold, or angle-seam profiles having a horizontal projection of 5/8 or less. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam. The S-5-T Mini is a medium-duty, non-penetrating seam clamp. It is a bit shorter than the S-5-T seam clamp and has one setscrew rather than two. The S-5-T Mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment-just about anything!

*S-5!® Mini clamps are not compatible with, and should not be used with, S-5! SnoRail /SnoFence or ColorGard® snow retention systems.

If you are using the Colorgard snow retention system, make sure you use the S-5-T seam clamp.

The S-5-T Mini clamp comes complete with one [1] 3/8″x 24 x 0.80″ round nose set screws and one [1] M8-1.25 x 16mm Hex Flange Bolt. All hardware is stainless steel.