S-5-N 1.5 Mini Seam Clamp

$4.50$5.26

S-5-N 1.5 Mini clamp was designed with patented S-5!® zero-penetration technology for application on the popular 1.5″ nail strip metal roof profiles and roofing types with similar profiles

The Hex bolt is no longer standard with S-5! mini clamps. Options are:

Clear
SKU: N/A Categories: , , Tags: , , ,

S-5-N 1.5 Mini clamp was designed with patented S-5!® zero-penetration technology for application on the popular 1.5" nail strip metal roof profiles and roofing types with similar profiles. (Please note these clamps were not designed to fit all nail strip profiles.) Smaller than the regular S-5-N 1.5, the clamp boasts an angular throat that accommodates most nail strip profiles, minimizing the need to field crimp. An angled wall with a nose permits the S-5-N 1.5 Mini to engage the triangle type profiles during the installation process there is no longer a need to hold the clamp in place while setscrews are tensioned. The combination of these two features allows the clamp to sit straighter on the seam. The S-5-N 1.5 Mini is a bit shorter than the S-5-N 1.5 and has one setscrew rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment just about anything!*

*S-5!® Mini clamps are not compatible with, and should not be used with, S-5! SnoRail /SnoFence or ColorGard® snow retention systems.

If you are installing ColorGard, use the S-5-N 1.5 seam clamp.

Nail Strip Profiles just got a lot simpler!

The S-5-N Mini clamp comes complete with one [1] 3/8"x 24 x 0.80" round nose set screw.  All hardware is stainless steel.

The Hex bolt is no longer standard with S-5! mini clamps. Options are:

S-5-N 1.5 Mini Brochure S-5-N 1.5 Mini Installation S-5-N 1.5 Mini CAD Drawing

Additional information

Weight 5.44 oz
Dimensions 1.57 × 1.69 × 2.90 in
Select Bolt Option

No Bolt, 16mm (5/8") Bolt, 20mm (7/8") Bolt, 40mm (1-9/16") Bolt

Reviews

There are no reviews yet.

Be the first to review “S-5-N 1.5 Mini Seam Clamp”

Your email address will not be published. Required fields are marked *

S-5-N 1.5 Mini clamp was designed with patented S-5!® zero-penetration technology for application on the popular 1.5″ nail strip metal roof profiles and roofing types with similar profiles. (Please note these clamps were not designed to fit all nail strip profiles.) Smaller than the regular S-5-N 1.5, the clamp boasts an angular throat that accommodates most nail strip profiles, minimizing the need to field crimp. An angled wall with a nose permits the S-5-N 1.5 Mini to engage the triangle type profiles during the installation process there is no longer a need to hold the clamp in place while setscrews are tensioned. The combination of these two features allows the clamp to sit straighter on the seam. The S-5-N 1.5 Mini is a bit shorter than the S-5-N 1.5 and has one setscrew rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment just about anything!*

*S-5!® Mini clamps are not compatible with, and should not be used with, S-5! SnoRail /SnoFence or ColorGard® snow retention systems.

If you are installing ColorGard, use the S-5-N 1.5 seam clamp.

Nail Strip Profiles just got a lot simpler!

The S-5-N Mini clamp comes complete with one [1] 3/8″x 24 x 0.80″ round nose set screws and one [1] M8-1.25 x 16mm Hex Flange Bolt. All hardware is stainless steel.