Need to Mount Snow Guard Systems & other Heavy Duty Applications on Taller Nail-Flange Profiles?
The S-5-N 1.5 (“N” stands for nail strip) is a non-penetrating, standing seam metal roof (SSMR) clamp.
The N 1.5 is the right choice for 1.5″ (38 mm) nail strips, such as: Bridger Steel 1.5” Tru Snap, Schlebach 1.5” NailStrip, Sheet Metal Supply NS 1.5”, Sheffield Metals SMI 1.5” and roofing types with similar profiles.
(For nail strip profiles with 1” seam height, see the S-5-N)
The S-5-N clamp comes complete with two (1) 3/8″x24 x 0.80″ round nose set screws and one (1) M8-1.25 x 16mm Hex Flange Bolt. All hardware is stainless steel. The S-5-N 1.5 clamp has been tested for load-to-failure results by an independent lab and is suitable for use with all snow retention systems, including ColorGard. Installing solar, satellite or other products that are not as demanding? The S-5-N 1.5 mini seam clamp may be a better choice.
S-5-N 1.5 fits Panel Profiles Similar to These:
- Designed for use on 1.5″ [38mm] nail strip metal roof panels
- Angled wall with nose permits the clamp to fully engage the triangular-shaped profiles, providing the best holding strength possible
- Perfect for use with heavy-duty applications like snow retention
- Two (2) T-30 Torx set screws (Torx bit provided) and one (1) M8 top bolt included
Not what you are looking for? Here are more S-5! clamps you might consider.
Not sure what you need? Call us at 770-405-1060 Monday-Friday EST or email us at firstname.lastname@example.org
S-5-N 1.5 Brochure
S-5-N 1.5 Installation Instructions
S-5-N 1.5 Dimensioned Drawing
There are no reviews yet.