SnapClip II for ColorGard

$3.17

An important component in ColorGard® snow retention systems.

Quantity Pricing Price
1 - 49 $3.17
50 - 199 $3.02
200 - 499 $2.96
500+ $2.90
SKU: 54000041 Categories: , ,

An important component in ColorGard snow retention systems, the SnapClip is designed to prevent ice that forms on the metal panel's surface from sliding under the ColorGard assembly. Usually only required on the bottom row of ColorGard, the Snap-Clip features a rubber foot that prevents scratching or damage to the roof panels surface. The SnapClip is designed to be "snapped" onto the ColorGard cross-member after installation, therefore can be retrofit on in-place systems. One (1) SnapClip is recommended.

Available in two sizes:

  • Snap-Clip II fits roof panels with rib (seam) heights between 1" and 1-3/4". It may also be used on 2" vertical seamed panels, but not on 2" horizontally seamed panels.
  • Snap-Clip III fits roof panels with rib (seam) heights from 1-3/4" to 3".

Additional information

Weight 6 oz
Dimensions 3 × 4 × 1 in

Reviews

There are no reviews yet.

Be the first to review “SnapClip II for ColorGard”

Your email address will not be published. Required fields are marked *

An important component in ColorGard snow retention systems, the SnapClip is designed to prevent ice that forms on the metal panel’s surface from sliding under the ColorGard assembly. Usually only required on the bottom row of ColorGard, the Snap-Clip features a rubber foot that prevents scratching or damage to the roof panels surface. 

The SnapClip is designed to be “snapped” onto the ColorGard pre-punched or unpunched cross-member after installation, therefore can be retrofit on in-place systems. One (1) SnapClip is recommended.

Available in two sizes:

A lower cost alternate to the Snapclip is the SnoClip II or SnoClip III. Note that SnoClip II and SnoClip III must be assembled to the ColorGard crossmember prior to installation.

You can also downpoad printable information about ColorGard Snow Retention Systems: