SnoClip II

$2.12

The SnoClip is designed to prevent ice that forms on the metal panel’s surface from sliding under the ColorGard assembly.

Quantity Pricing Price
1 - 49 $2.12
50 - 199 $2.02
200 - 499 $1.98
500+ $1.94
SKU: 54000043 Categories: , , ,

An important component in any ColorGard snow retention systems, the SnoClip is designed to prevent ice that forms on the metal panel's surface from sliding under the ColorGard assembly. Usually only required on the bottom row of ColorGard, the SnoClip features a rubber foot that prevents scratching or damage to the roof panels surface. The SnoClip must be slipped onto the ColorGard cross member during assembly. One (1) SnoClip is recommended per roof panel.

SnoClip II fits roof panels with rib (seam) heights between 1" and 1-3/4". It may also be used on 2" vertical seamed panels, but not on 2" horizontally seamed panels.

IMPORTANT: While most applications will require a single row of snow retention with an S-5!® clamp on every panel seam, we always recommend you contact us with your project information and allow to us to perform the calculations necessary to ensure a permanent snow retention system.

Additional information

Weight 6 oz
Dimensions 3 × 4 × 1 in

Reviews

There are no reviews yet.

Be the first to review “SnoClip II”

Your email address will not be published. Required fields are marked *

An important component in any ColorGard snow retention system, the SnoClip is designed to prevent ice that forms on the metal panel’s surface from sliding under the ColorGard assembly. Usually only required on the bottom row of ColorGard, the SnoClip features a rubber foot that prevents scratching or damage to the roof panels surface.

The SnoClip must be slipped onto the ColorGard pre-punched or unpunched cross member during assembly. One (1) SnoClip is recommended per roof panel.

SnoClip II fits roof panels with rib (seam) heights between 1″ and 1-3/4″. It may also be used on 2″ vertical seamed panels, but not on 2″ horizontally seamed panels.

For taller panels use SnoClip III

Already installed ColorGard but need to add SnoClips? SnapClip II or SnapClip III are the solution for retrofit to both the Un-Punched or Pre-Punched ColorGard cross-member. SnapClip simply “snaps” onto the back of the cross-member with tap of a rubber faced mallet.

You can also download printable information about ColorGard Snow Rentention Systems: